Supermicro SUPERSERVER 6014A-8, Руководство пользователя

Страница: 3 / 130

Preface
About This Manual
This manual is written for professional system integrators and PC techni-
cians. It provides information for the installation and use of the Super-
Server 6014A-8. Installation and maintainance should be performed by ex-
perienced technicians only.
The SuperServer 6014A-8 is a high-end 1U rackmount server based on the
SC813S-500 rackmount server chassis and the X6DAR-8G serverboard,
which supports single or dual Intel
®
Xeon TM processors at a Front Side
(system) Bus speed of 800 MHz and up to 16 GB of DDR333 (PC2100) or 32
GB of DDR266 (PC1600) low-profile SDRAM memory.
Manual Organization
Chapter 1: Introduction
The first chapter provides a checklist of the main components included with
the server system and describes the main features of the SUPER X6DAR-
8G serverboard and the SC813S-500 chassis.
Chapter 2: Server Installation
This chapter describes the steps necessary to install the SuperServer 6014A-8
into a rack and check out the server configuration prior to powering up the
system. If your server was ordered without processor and memory components,
this chapter will refer you to the appropriate sections of the manual for their
installation.
Chapter 3: System Interface
Refer here for details on the system interface, which includes the functions
and information provided by the control panel on the chassis as well as
other LEDs located throughout the system.
iii
Preface