Supermicro FatTwin F628G3-FT+, Руководство пользователя

Страница: 3 / 160

iii
Preface
Preface
About This Manual
This manual is written for professional system integrators and PC technicians. It
provides information for the installation and use of the FatTwin™ F628G3-FT+/FTPT+.
Installation and maintainance should be performed by experienced technicians only.
The FatTwin F628G3-FT+/FTPT+ is a high-end server based on the
F424AG-R2K04BP 4U rackmount chassis and a dual processor X10DRFF-iG/iTG
serverboard. All models have four serverboard nodes, each node with an IPMI
LAN port and two (2) hot-swap hot-swap 3.5" SATA Hard Disk Drives (HDD).
The only difference between the two server models is that the F628G3-FTPT+
has 10-Gigabit LAN ports, wheras the F628G3-FT+ only has Gigabit LAN ports.
Manual Organization
Chapter 1: Introduction
The fi rst chapter provides a checklist of the main components included with
the server system and describes the main features of the X10DRFF-iG/iTG
serverboards and the F424AG-R2K04BP chassis.
Chapter 2: Server Installation
This chapter describes the steps necessary to install the FatTwin F628G3-FT+/FTPT+
into a rack and check out the server confi guration prior to powering up the system.
If your server was ordered without processor and memory components, this chapter
will refer you to the appropriate sections of the manual for their installation.
Chapter 3: System Interface
Refer here for details on the system interface, which includes the functions and
information provided by the control panel on the chassis as well as other LEDs
located throughout the system.
Chapter 4: Standardized Warning Statements for AC Systems
You should thoroughly familiarize yourself with this chapter for a general overview
of safety precautions that should be followed when installing and servicing the
FatTwin F628G3-FT+/FTPT+.