Supermicro FatTwin F628G3-FT+, Руководство пользователя

Страница: 106 / 160

6-24
FatTwin F628G3-FT+/FTPT+ User's Manual
6-16 Replacing the Power Supply
The F424AG chassis includes a 2000 Watt power supply. This power supply is auto-
switching capable. This enables it to automatically sense and operate at a 100v to
240v input voltage. An amber light will be illuminated on the power supply when the
power is off. An illuminated green light indicates that the power supply is operating.
Power Supply Replacement
The F424AG chassis models utilize redundant power supplies, with a total of
four in the chassis. In the unlikely event that the power supply unit needs to be
replaced, one power supply can be removed, without powering down the system.
Replacement units can be ordered directly from Supermicro (See the contact
information in the Preface of this manual).
Changing the Power Supply
1. Disconnect the power cord on the back of the failed power supply as
described in Section 6-3.
2. Press the release tab on the back of the power supply and pull the power
supply out using the handle provided.
3. Push the replacement power supply module into the power bay until it clicks
into the locked position.
4. Plug the AC power cord back into the module and return the node to its bay
in the chassis.
Release Tab
Figure 6-23: Changing the Power Supply