Supermicro FatTwin F628G3-FT+, Руководство пользователя

Страница: 94 / 160

6-12
FatTwin F628G3-FT+/FTPT+ User's Manual
Figure 6-12: Removing the Lower Power Distributor Board
Figure 6-11: Removing the Upper Power Distributor Board
6-9 Power Distributor Board Replacement
Each of the serverboard nodes includes an upper and lower power distributor board.
In the unlikely event of a failure of the power distributor board, replacement is simple
and requires only a Phillips head screwdriver.
Changing the Power Distributor Board
1. Remove the power cord from the rear of the node as described in Section
6-3. Remove the node from the chassis as described in Section 6-4. Place
the node on a fl at, stable surface and remove the node cover as described in
Section 6-7.
2. Remove the four screws securing the upper power distributor board to the
support bracket.
3. Carefully lift the power distributor board up and out of the node. Set the
screws aside for later use.
4. Remove the screw securing the bracket to the fl oor of the node and lift it out
of the node.
5. Remove the screws securing the lower power distributor board to the fl oor of
the node and set the screws aside for later use.
6. Lift the lower power distributor board up and out of the chassis.
1
3
1
6