Supermicro FatTwin F628G3-FT+, Руководство пользователя

Страница: 133 / 160

Chapter 7: BIOS
7-27
Support Aggressive Link Power Management
When this item is set to Enabled, the SATA AHCI controller manages the
power usage of the SATA link. The controller will put the link to a low power
state when the I/O is inactive for an extended period of time, and the power
state will return to normal when the I/O becomes active. The options are
Enabled and Disabled.
sSATA Port 0~ Port 3
This item displays the information detected on the installed on the sSATA
port. specifi ed by the user.
•
Model number of drive and capacity
sSATA Port 0~ Port 3
Select Enabled to enable an sSATA port specifi ed by the user. The options
are Disabled and Enabled .
Spin Up Device
On an edge detect from 0 to 1, set this item to allow the PCH to start
a COMRESET initialization to the device. The options are Enabled and
Disabled .
Device Type
Use this item to specify if the sSATA port specifi ed by the user should be
connected to a Solid State drive or a Hard Disk Drive. The options are
Hard Disk Drive and Solid State Drive.
*If the item above "Confi gure sSATA as" is set to IDE, the following items
will display:
sSATA Port 0~ Port 3
This item indicates that an sSATA port specifi ed by the user is installed
(present) or not.
sSATA Device Type (Available when a sSATA port is detected)
Use this item to specify if the sSATA port specifi ed by the user should be
connected to a Solid State drive or a Hard Disk Drive. The options are
Hard Disk Drive and Solid State Drive.
*If the item above "Confi gure sSATA as" is set to RAID, the following
items will display: