SunStar SPS/A-Pattern Series, Руководство пользователя

Страница: 75 / 195

75
< P a r a m e t e r S e t >
0 7 9 .
X P L U S L i m i t
0 8 0 . X M I N U S L i m i t
0 8 1 . Y P L U S L i m i t
0 7 8 . S e w i n g L i m i t
1 ) D I S A B L E
2 ) E N A B L E
<
0 7 9 . X P L U S L i m i t
X : 0 0 0 6 5
D. Use the direction change cursor to select
2) ENABLE and press ENTER .
E. Use the direction change cursor to select
079. XPLUS Limit.
The default value is set at 65mm (for SPS-1306
machines). Use the up/down direction key
to increase the limit as desired.
※ In case of C-Series, the unit can be set by the
unit of [50mm]. As such, in case of 5050, it is
displayed as X : 00050. In other words,
50×50[mm] equals 2500mm. Likewise, if the
maximum expansion is X: 00250,
it means 250×50[mm]=12500mm.
※ Ex) If you increase the X-axis mechanical
feeding limit to a maximum 140mm, you can
set up to 70mm in the X-axis plus direction.
0 7 9 . X P L U S L i m i t
X : 0 0 0 7 0
F. To increase limit in the opposite direction, select
080. XMINUS Limit.
The default value is set at -65mm (for SPS-
1306 machines). Use the up/down direction
key
to increase the limit as desired.
※ Ex) If you increase the X-axis mechanical
feeding limit to a maximum 140mm, you can
set up to -70mm in the X-axis minus
direction.
< P a r a m e t e r S e t >
0 8 0 .
X M I N U S L i m i t
0 8 1 . Y P L U S L i m i t
0 8 2 . Y M I N U S L i m i t
0 8 0 . X M I N U S L i m i t
X : - 0 0 0 6 5
0 8 0 . X M I N U S L i m i t
X : - 0 0 0 7 0
G. If you increased the mechanical feeding limit of Y-axis, refer to the above instructions to expand the
feeding limit.
After setting the sewing limit in accordance with the mechanically expanded limit, you can check if the
machine feeds to the actual expanded limit. Use the X-Y Jog Test function in Machine Test function
to check whether the machine feeds to the actual expanded limit.