manualshive.com logo in svg

SunStar SPS/A-Pattern Series, Руководство пользователя, Страница: 144 / 195

Поделиться
Скачать
SunStar SPS/A-Pattern Series Скачать руководство пользователя страница 144

144

Function No. : 063

Function Name : Setting the magnifying/demagnifying mode

It is to select and set the magnifying/demagnifying mode.

The Magnifying/demagnifying function is not used.

[Contents]  The machine uses the pattern data in the programmed size.

As the magnifying/demagnifying function is not selected, the X scale , Y scale 

keys are not operated.  Adjust the "XS" and "YS" indicated on the screen to 100%

063. Scale Mode

1) DISABLE

Setting

Value

It is to set the magnifying/demagnifying mode using the stitch length.

(Factory installed condition)

[Contents] While the number of stitches are the same, the length of the stitches along 

the X and Y axis are adjusted according to the magnifying/demagnifying rate.
Set the rate within the feed plate transfer limit.

2) STITCH_LEN

It is to set the magnifying/demagnifying mode using the number of stitches.

[Contents] While the length of stitches are the same, the number of stitches are adjusted 

along the X and Y axis. Set the rate within the feed plate transfer limit.

3) STITCH_NUM

It is not applied

(It is going to apply
later)

Magnifying/demagnifying 
according to stitch length

Magnifying/demagnifying

according to number of stitches

Содержание SPS/A-Pattern Series




































































































































































































Отзывы:

Нет отзывов