SunStar SPS/A-Pattern Series, Руководство пользователя

Страница: 79 / 195

79
D. Move to and press key in order to use this function
ENTER 2)ENABLE
C. When choosing, is set at
.
: After trimming, don’t use the
reverse rotation function after
trimming.
: After trimming, use the reverse
2)ENABLE
1)DISABLE
1)DISABLE
086. RevAfterTrim
0 8 6 . R e v A f t e r T r i m
1 ) D I S A B L E
2 ) E N A B L E
<
3-21) Setting Reverse Rotation after Trimming [Only applied for SPS/B/C-Series]
Function of Reverse rotation after trimming is as follows. When sewing material is thick, the thick material
can interfere with needle if the needle is placed at the highest point of thread take-up. In that case, the
interference will be prevented if the needle is placed in reverse order. Therefore, after trimming, set the
point of reverse rotation as the applicable angle by using the reverse rotation function. If sewing material is
not thick, don’t use the function.
Setting method is as follows.
< < M a i n M e n u > >
1 . P a r a m e t e r S e t
2 . P r o g r a m
3 . B o b b i n W i n d
A. Choose Parameter Set from Main Menu by pushing
key.
MODE
< P a r a m e t e r S e t >
0 8 6 .
R e v A f t e r T r i m
0 8 7 . R e v e r s e A n g l e
0 8 8 . O i l C o n t r o l
B. Choose from Parameter Set by
using keys . direction
086. RevAfterTrim