SunStar SPS/A-Pattern Series, Руководство пользователя

Страница: 22 / 195

22
J U M P N O N E
X : 0 0 0 0 0 A N : 0 0 0 2 7
Y : 0 0 3 0 0 A
F u n c t i o n C o d e ?
E. If you press EXE key, the machine operates
pattern data, then the feed plate moves according
to the operated data.
F. After pressing CODE key, if you know function
codes related to pattern programming, input three
digit number, but if not, move to “10. Circle”
by using direction keys
after pressing
ENTER key, then press ENTER key again.
G. Input the stitch width by using the digit keys,
then press ENTER key. (For example, if you
want to set the stitch width as 3mm, input
[0][3][0].)
H. Move to the second random coordinates that
passes on a circle (For example, X:00300
Y:00000) by using direction keys, then press PNT
SET key. Same as above, move to the third
random coordinates that passes on a circle (For
example, X:00000 Y:-00300), then press PNT
SET key. Whenever you press PNT SET key,
the number of screen increases.
I. If you press EXE key, the machine operates
pattern data, then the feed plate moves according
to the operated data.
J. Press TRIM key to input the trimming code.
Then, “000:TRIM”appears on the screen for a
little while, and replace the screen like a
figure on the right side.
K. If you press FORW and BACK keys to progress
and reverse 1 stitch, you can confirm the real
shape to be sewn. Whenever you once press the
keys, you can see the operating form and
coordinates at that time. If you want to perform
test sewing, goes to the next step directly. If you
press continuously, it moves to the start or to
the end of pattern data consecutively.
L. Press TEST key.
The upper feed plate comes to ascend and
moves to the origin or sewing start point, then
goes up. After that, READY LED turns on.
Press SPEED key and adjust the speed properly.
Then if you step on the pedal switch on the
right side, the upper feed plate comes to descend,
and if you step on the pedal switch on the left
side, the machine starts test sewing. If the test
sewing is finished, the upper feed plate moves to
origin and comes to ascend.
< F u n c t i o n C o d e >
0 1 0 : C I R C L E <
0 1 1 : J U M P S P D
0 1 2 : S T I S P D
0 1 0 : C I R C L E
W I D T H : 0 3 0 [ 0 . 1 m m ]
0 1 0 : C I R C L E
X : 0 0 0 0 0
Y : - 0 3 0 0
N : 0 0 2
C I R C L E N O N E
X : 0 0 0 0 0 A N : 0 0 0 9 0
Y : 0 0 3 0 0 A
F u n c t i o n C o d e ?
C I R C L E N O N E
X : 0 0 0 0 0 A N : 0 0 0 9 0
Y : 0 0 3 0 0 A
F u n c t i o n C o d e ?
< T e s t S e w i n g >
S P : 1 5 0 0
T R I M N O N E
X : 0 0 0 0 0 A N : 0 0 0 9 1
Y : 0 0 3 0 0 A
F u n c t i o n C o d e ?