SunStar SPS/A-Pattern Series, Руководство пользователя

Страница: 74 / 195

74
3-17) Sewing Limit Function
This function for setting sewing limit is designed to expand the mechanical sewing limit of the machine.
First mechanically expand the X-Y feeding area of the machine, and set the sewing limit in the parameter
in accordance with the expanded area.
※In case of C-Series, the area can be expanded up to 25000×25000mm.
< < M a i n M e n u > >
1 . P a r a m e t e r S e t
2 . P r o g r a m
3 . B o b b i n W i n d
A. Press MODE and select Parameter Set in Main
Menu.
Refer to the following for set-up.
< P a r a m e t e r S e t >
0 7 8 .
S e w i n g L i m i t
0 7 9 . X P L U S L i m i t
0 8 0 . X M I N U S L i m i t
0 7 8 . S e w i n g L i m i t
1 ) D I S A B L E <
2 ) E N A B L E
B. Use the direction change cursor in the
Parameter Set and select 078. Sewing Limit.
C. Sewing Limit is defaulted at 1) DISABLE.
< < M a i n M e n u > >
7 . O t h e r P t r n C a l l <
E. When conversion is finished, the screen returns
to the original status.
< < M a i n M e n u > >
5 . P a t t e r n L i s t <
6 . E M B C a l l
7 . O t h e r P t r n C a l l
F. Press No. 5 “Pattern List" from the main
menu, and check whether the converted file
from the USB flash drive is properly saved.
M e m o r y ( 0 ) / U S B ( 1 )
T o E x i t ( E S C ) . . .
G. Press No. 1.
< < P a t t e r n L i s t > >
0 0 1 <
H. The list of design patterns saved is displayed.
E n t e r N u m b e r t o
b e s t o r e d
N O : 0 0 1
D. Enter a new name for the file, which will be
converted and saved, and press “Enter."