SunStar SPS/A-Pattern Series, Руководство пользователя

Страница: 33 / 195

33
0 5 1 : S T I T C H D R A G
X : - 0 0 0 0 1
Y : - 0 0 0 6 0
N : 0 0 0
H. If you press EXE key, change to new needle
location is completed.
I. Confirm if needle location was changed to the
desired location by using FORW and BACK
key.
G. Move to the location desired movement of one
stitch by using direction key.
※
X-Y coordinate value is different according
to location of needle.
A. Insert partial pattern data into the USB flash
drive containing the pattern to move and
change.
B. Press MODE key.
< < M a i n M e n u > >
2 . P r o g r a m
<
3 . B o b b i n W i n d
4 . M a c h i n e T e s t
L I N E
X : - 0 0 0 1 A N : 0 0 0 5 9
Y : - 0 0 6 0 A
F u n c t i o n C o d e ?
2-2) Partial Movement Function of Pattern Data
Move part of pattern to different location among the sewing shape.
End Point of Movement Scope Start Point of Movement Scope
Scope to Move
Location to Move
< Before Movement > < After Movement >
O R I G I N
X : 0 0 0 0 0 A N : 0 0 0 0 0
Y : 0 0 0 0 0 A
F u n c t i o n C o d e ?
C. After moving to “2. Program” menu by using
direction key , press ENTER key. At this
time, the upper feed plate comes down and
moves to the original point.