Shenzhen SUNSKY Technology Limited
4
．
Micphone 10. Hanging hole
5
．
Indicator 11. Setting key
6
．
Power switch 12. Base board
Important suggest: Tear the camera protected membrane and keep the lens of the camera clean to
assure best imaging quality.
Remote control Instruction
Figure 2: Remote control Instructions
1.
Antenna 3. Set defense Key
2.
Remote control indicator 4. Cancel defense Key
5. Emergency key
Indicator Status Instruction
Color
Action
Status
Flash slowly
Searching the network.
Flash quickly
Sensor or motion detection alarming.
Red
Constant Light
Not installed SIM card, or the remote camera damaged.
Constant Light
Defense status, Activating the auto-alarm function.
Flash slowly
Cancel defense status. Canceling the auto-alarm function.
Flash quickly
Processing data.
Green
Light two seconds
Successfully Reset factory setting, or loading sensor.
Orange
Flash
Loading remote control status.
10
