Shenzhen SUNSKY Technology Limited
22
After successful set, it will reply “motion detection open”
Motion detection sensitivity
:
#36#grade#
(Note: grade can be 1, 2, 3, 4, 5. the larger the number, the stronger the sensitivity. The
default value is 4. In grade 4, the camera can detect human body motion)
After successfully set, it will reply: “Motion detection sensitivity set successfully.”, if wrong
parameter, it will reply “Invalid detection sensitivity parameter, the range is 1-5, please check
and try again”
12. Infrared light
(Authority: Master, Family)
Only turn on infrared light can enable the camera get clear image in dark night. Camera will
control the infrared light automatically. However, if AC power failure and user hope to close
the infrared light to save the battery power, master or family can send following SMS
command to close the infrared light:
Close infrared light:
#31#0#
After successful set, It will reply “Infrared light closed”.
Once turn off the infrared light, it can’t take images in dark night. User need to send following
SMS to start the infrared light:
Turn on infrared light:
(default setting)
#31#1#
After successful set, it will reply “Infrared light activated, it will auto work to adjust the
brightness “
13. Capturing images
(Authority: Master, Family, Guest)
No matter the camera is in defense status or cancel defense status, master or family or guest
can capturing images from the camera.
Capturing one image:
Method 1
：
Master or family call the camera, hand up as soon as heard the ringing tone. The
camera will reply “Image capturing request received. The camera is busy sending the MMS
image.” And the caller can receive the MMS image later.
If guest call the camera number, it will not reply and can’t receive MMS image.
Method 2
：
Send following SMS command to camera:
For master and families
：
#03#
For guest
：
#03#password#
