Shenzhen SUNSKY Technology Limited
28
Capture image Interval:
Master or family send following SMS command:
#103#time#
Interval time value should be 3 to 10, the unit is 0.1 second. Default value is 5, it’s 0.5 second.
After successful set, camera will reply “Set capture image interval successfully”.If parameter
wrong, it will reply “Wrong parameter, please check and try again”.
18. Network parameter setting
(Authority: Master)
Generally, user don’t need to set the network parameter before use, The factory have set the
right parameter according to different country’s GSM network provider. If your remote camera
can’t send MMS all the time, you can try to do following operation:
MMS center setting:
Master send following SMS command:
#124#MMS center#
For example: #124#http://mmsc.monternet.com#
Set APN parameter:
Master send following SMS command to camera:
#125#gateway IP#gateway port#APN#APN user name#APN password#
For example:
#125#10.0.0.172#9201#cmwap#wap#wap#
19. Timing send MMS
(Authority: Master, Family)
Available timing send MMS:
Master or family send following SMS command to available this function:
#115#1#
After successful set, camera will reply “Timing send MMS open”. It will send MMS to master
according to the setting.
Set time period to send MMS:
Master or family send following SMS command to camera:
#116#work day#period 1 start time#period 1 end time#period 1 interval#period 2 start
time#period 2 end time#period 2 interval#…
