Shenzhen SUNSKY Technology Limited
33
3
Indicator constant
light in red color.
Can’t find or identify
the SIM card;
SIM card no install
properly: Power off the
camera and check it
again.
4
Camera didn’t
response of any
operation.
Host work abnormally.
Switch off the power,
check SIM card, or
reset factory setting.
Network signal weak or
network busy.
Place the camera at
other place with strong
signal and try again.
SIM card PIN code
active.
Close the PIN code.
5
After starting the
camera, indicator
flashed in red color
and can not turn to
green.
SIM card invalid.
contact with local operator to
check of it.
Camera low power.
Connect external power
to recharge the battery.
Remote control low
power.
Change remote control
battery.
Didn’t pull out the
antenna.
Pull out remote control
antenna.
6
Remote control
can’t work. Or
action slowly. Or
control distance
range shortened.
Two remote control work
simultaneously.
Try only one remote
control.
The remote control or
sensor already studies
successfully.
Exit the loading status.
The sensor quantity already
reach it’s max number.
Delete old sensors before add
new sensor.
7
Can’t add new
remote control or
wireless sensor
Didn’t set master number
Set master number before add
sensor.
8
Can’t start the camera
after long time supply
with the battery.
Battery run out of power.
Connect the camera to external
AC power and charge for at
least one hour, then, restart
camera.
Note: If the problem can’t be solved with above guidelines, contact to your local distributor or
after service center.
Chapter 8 Main Technical Parameters
Power adaptor Input: 100V
～
240V/50Hz Output: 5.5V DC
