Shenzhen SUNSKY Technology Limited
26
16. Emergency Alarm
(Authority: Master, Family)
If emergent state happening, the camera can make emergency call when the user
presses the Emergency key of the remote control.
Two ways of emergency key alarm: dial emergency number (including master) and send
SMS (MMS).
#39#number#
If the number is 0 (default), when pressing emergency key of the remote control,
the camera will dial master and other pre-set emergency number orderly for 3 times
until answering. Answering the calling can hear the live voice.
After successful set, camera reply: “Set emergency alarm by dialing successfully ”.
If the number is 1, the camera will send SMS and MMS to master when alarm. After
successful set, camera reply:”Set emergency alarm by SMS & MMS successfully.”.
17.
Image parameter setting
(Authority: Master, Family)
Set Image Size:
Master and family send following SMS command to set three different sizes:
#32#value#
Value is 1, it means image size is 160 ×128(pixel).
Value is 2, size is 320×240;(QVGA default).
Value is 3, size is 640 × 480 (VGA).
After successful set, camera will reply “Set image size successfully”.
For normal small screen cell phone, the image size is 160 × 128, one MMS image size is 4K.
For image QVGA (default) 320×240, one MMS image size is 9K.
For image VGA 640×480, one MMS image size is 33K.
If the value incorrect, camera will reply “Wrong parameter, please check and try again”.
Image quantity when alarm:
#33#quantity#
Quantity is number 2-8, default is 5. After successful set, it will reply “Set alarm image quantity
successfully”. If wrong parameter, it will reply “Wrong parameter, please check and try again”.
Note: if image size 640×480, max image quantity is 2.
