Shenzhen SUNSKY Technology Limited
13
3. Active remote control
When the green indicator lightened constantly or flashed, Press and hold the “Set” key at
the rear board of the host for 2 seconds. The indicator change to flash with orange color
indicated the camera switched to learning state. Then press any key of the remote control to
send signal to the host. After the host receives the new remote control signal successful, the
indicator of the host will lighten constantly with green color for 2 seconds. Press “Set” key
again to exit the learning state. Otherwise, it will automatically exit after 15 seconds.
Remote camera can recognized and controlled by more than 5 remote controls.
4. Set
defense
Press “Set defense” key directly in the remote control to set defense.
If setting successful, a “DI…” tone can be heard from the host, and a “Set defense
successfully” SMS will be sent to the master’s mobile. The indicator of the host will lighten
constantly with green color.
5. Cancel
defense
Press “Cancel defense” key directly in the remote control to cancel defense.
If setting successful, a “Di…” tone can be heard from the host, and a “Cancel defense
successfully” SMS will be sent to the master’s mobile. The indicator of the host will flash in
green color.
6. Capturing
images
Capturing one image each time:
Method 1
：
Master or family call remote camera number, hang up as soon ad the ringing
tone is heard. You can receive notify message “Image capturing request received, the
camera is busy sending MMS images”, then you will receive images later.
Method 2
：
Send following SMS command to camera:
For master and family
：
#03#
For guest
：
#03#password#
Capturing several images one time:
If user needs several images, send following SMS command to camera:
For master and family:
#03#image quantity#
