Shenzhen SUNSKY Technology Limited
21
“Di…” tone and exit the loading status.
5
）
If the camera failed to load the sensor or no sensor exist, the indicator of the camera
will flash with red and green alternately for about one minute, then the camera will exit
the loading status automatically and back to the previous defense or cancel defense
status.
6
）
Max 15 pieces wireless sensors can be loaded in remote camera. If reach its max
numbers, the camera will send SMS as: “The sensors are full. Please delete old
sensors before add new ones.” .
7
）
If the sensor description invalid, the camera will reply “Sensor description invalid,
please rename the sensor”.
Modify wireless sensor:
In
step 2 add wireless sensor
, if the “Sensor description” in sent SMS is same as old
sensor, the camera will load new sensor information and replace the old sensor.
Delete all wireless sensors:
Master or family send following SMS to camera:
#112#
After successful delete, it will reply “All sensor delete successfully”
Guest are forbidden to do this operation. If guest send above SMS command to camera, it will
reply “Sorry, you are forbidden to do this operation”.
11. Motion detection
(Authority: Master, Family)
Motion detection is a moving body recognition technology by comparing the difference
between the sequential images.
Motion detection can be functional only when the camera is in set defense status and enable
the motion detection function. Motion detection function is active in the default setting.
Note: Please only use the motion detection function in still and quiet place, such as quiet room.
Don’t make it face shaking tree or other moving things, otherwise, it will continuously alarm
and may destroy the camera.
Master or family send following SMS command to camera:
Close motion detection
:
#22#0#
After successful set, it will reply “Motion detection closed”
Open motion detection
(default setting):
#22#1#
