28
4.
Compressor
The icon will be lightened when compressor is running, otherwise it will be extinguished.
5.
E-heater
The icon will be lightened if E-heater is activated, otherwise, it will be extinguished. If E-heater is
automatically activated by unit, the icon will be lightened. If E-heater is manually activated, it will flash
with 0.5Hz frequency. When setting E-heater manually ON/OFF, it will flash with 2Hz frequency.
6.
Disinfect
The icon will be lightened when the unit is under disinfecting mode, otherwise it will be extinguished.
The icon will be lightened if disinfect mode is automatically activated by unit. The icon will flash with
0.5Hz frequency, if disinfect mode is manually activated. It will flash with 2Hz frequency when setting
this mode or setting disinfect timer.
7.
High temperature Alarm
If setting water temperature is higher than 50°C, the icon will be lightened, otherwise it will be
extinguished.
8.
Alarm
When unit is under protection/error, the icon will flash with 5Hz frequency as well as buzzer will
sound 3 times per minute until protection/error eliminated or press ‘CANCEL’ for 1 second.
9.
Lock If button is locked, the icon will be lightened, otherwise it will be
extinguished.
10.
Temperature unit
If setting temperature unit as Celsius, ‘°C’ will be lightened, ‘
’ will show Celsius degree. If setting
temperature unit as Fahrenheit, ‘ºF’ will be lightened, ‘
’ will show Fahrenheit degree.
11.
Invalid If button is under lock mode, press any button except unlock button, the
icon will be lightened.
12.
13. Reserved
The icon will be lightened if screen is unlocked. It shows water temperature on normal
mode.
If on
vacation mode, it shows remaining vacation days. Under setting mode, it shows
setting temperature. If under query mode, it shows unit setting or running parameters, error or
protection code.
Содержание Calor Top 200D
