Sunerg Solar Energy Calor Top 200D, Инструкция по установке и эксплуатации

Страница: 31 / 42

31
and icon ‘ will be lightened and the hour value of clock will flash slowly.

By pressing ‘UP’ or ‘DOWN’, set the hour value of clock.

Press ‘CLOCK’ button to confirm the hour setting. Then the minute value of clock will flash slowly.

By pressing ‘UP’ or ‘DOWN’, set the minute value of clock.

Press ‘ENTER’ to confirm the disinfect clock setting and quit out.
Notes:
Unit will automatically start disinfect function at the above-set clock every 7 days.
If without disinfect clock setting, unit will automatically start disinfect function at 23:00 every 7 days.
If unit is off or under disinfect mode, press ‘DISINFECT’ will lead to show ‘ ’ on the display.
VACATION
In vacation mode, the setting target water temperature is 15°C as default and ‘ ’ will show the
remaining vacation days. On the last day of vacation, unit will automatically start disinfect function,
and automatically reset the target temperature to the last one before vacation.
If unit has already been under vacation mode or off, press the button of ‘VACTION’, then it will lead to
show invalid icon ‘ ’ on the display.

Press ‘VACATION’ button to enter vacation setting. Icon” will flash. Icon ‘ ’ will be lightened.
Icon ‘DAY’ will show the last setting vacation days.

By pressing ‘UP’ or ‘DOWN’, set vacation days. The day’s range is 1~99 days, default as 14
days.

Press ‘ENTER’ to confirm vacation setting and quit out. The unit will immediately go into vacation
mode.
Setting clock

Press button ‘CLOCK’ for 3 seconds to enter clock setting. Then icon ‘ ’ will be
lightened
and the hour value of clock will flash slowly.

Press button ‘UP’ or ‘DOWN’ to set the hour value of clock.

Press ‘CLOCK’ to confirm the hour setting. Then the minute value of clock will flash slowly.

Press ‘UP’ or ‘DOWN’ to set the minute value of clock.

Press button ‘ENTER’, confirm the minute setting and quit clock setting.