Sunerg Solar Energy Calor Top 200D, Инструкция по установке и эксплуатации

Страница: 29 / 42

29
14.1 Water temperature setting
The icon will be lightened when setting water temperature or setting days for vacation.
14.2 Date setting
The icon will be lightened when setting days for vacation. If under vacation mode, the icon will be lightened.
15. Timer
There are six timers can be set. If anyone of them has been set, the icon will lighten the corresponding
one when screen is unlocked. If there is none of timers has been set, it will keep extinguished. If timer is
being set, it will flash the corresponding one with 2Hz frequency as well lighten the timer which has been
set.
16. Clock and clock setting
The icon shows the clock. Whenever there is any setting for clock, ‘ ’ will be lightened .
Operation panel explanation
Notes: Any press of button is effective only under button and display unlocked state.
E-heater
Turn on E-heater manually. If E-heater is off, follow these steps below to manually turn it on.

Press ‘E-HEATER’, icon ‘ ’ will flash.

Press ‘ENTER’ to confirm manually turning on E-heater, then E-heater is activated to heat up
water to the target temperature.

After that, if need manually turn on E-heater again, repeat these steps.

If E-heater is already on, press ‘E-HEATER’ will lead to show invalid icon ‘ ’ on the display.
Temperature unit shift

Long pressing the ‘E-HEATER’ key for 10 seconds then can shift to set the temperature display
unit from ‘F’ to ‘C’ or from ‘C’ to ‘F’.

The default is ‘C’. When it is shifted to display ‘F’, it still will display ‘C’ while it operates spot
check.