Sunerg Solar Energy Calor Top 200D, Инструкция по установке и эксплуатации

Страница: 30 / 42

30
If screen is unlocked, corresponding value will increase by pushing ‘INCREASE’ or ‘DECREASE’.

When setting temperature, by pressing ‘INCREASE’ (‘DECREASE’) more than 1 second,
temperature value will be increase (decrease) continuously.

When setting clock/timer, through pressing ‘INCREASE’ (‘DECREASE’) more than 1 second,
clock/timer value will be increased (decrease) continuously.

When setting vacation days, pressing ‘INCREASE’ (‘DECREASE’) more than 1 second, day
value will be increased continuously.

Under query mode, check items will page up by pressing ‘INCREASE’ or page down by pressing
‘DECREASE’.
CANCEL
To cancel setting, quit setting, clear alarm, etc. And to clear alarm buzzer, need to press for 1 second.
ON/OFF (With LED indicator)

If unit is standby, press ‘ON/OFF’, then unit will be off.

If unit is on, press it, and then unit will be off.

If unit is off, press it, unit will be on.

LE D i ndi cator ‘ ’ will be lightened if unit is on or standby and extinguished if unit is off.
ENTER (Include CONFIRM/UNLOCK)

If screen and buttons are unlocked, press to upload setting parameters after setting any
parameter.

If press within 10 seconds, setting parameters will be uploaded to unit.

If press beyond 10 seconds, all the parameters should be reset.

If screen and buttons are locked, press it for 3 seconds to unlock them.
DISINFECT
Manually turn on disinfect function.

Press ‘DISINFECT’ button, the icon ‘ ’ will flash.

Press ‘ENTER’ to confirm manually activate disinfection function. The unit will heat up water to
65°C at least for disinfection.
Disinfect clock setting

Press button ‘DISINFECT’ for 3 seconds to enter disinfect clock setting. Then icon ‘ ’ will flash,
INCREASE/UP & DECREASE/DOWN