Sunerg Solar Energy Calor Top 200D, Инструкция по установке и эксплуатации

Страница: 18 / 42

18
2.9 Water affusion and effusion
Water affusion: If the unit is used for the first time or used again after emptying the tank, please
make sure that the tank is full of water before turning on the power.
1) Open the cool water inlet valve and the hot water outlet valve.
2) When water flows out from the water outlet, the tank is full. Turn off the hot water outlet
valve and water affusion is finished.
Caution:
Operation without water in water tank may result in the damage of auxiliary E-heater.
Due to such damage, manufacturer will not be liable for any damages caused by this issue.
Water effusion: If the unit needs cleaning, moving etc, the tank should be emptied.
1) witch off the unit, and close the cool water inlet valve, open the hot water outlet valve and
open drainpipe.
2) After emptying, the nut of drainpipe should be replaced and closed.
Note: The outlet water temperature maybe very high when emptying, beware of your body for burns.