Sun Oracle Fire X4470 M2, Руководство по обслуживанию

Страница: 132 / 194

7-22 Sun Server X2-4 Service Manual • April 2013
FIGURE 7-14
BIOS PCIPnP Screen
3. Navigate to the Option ROM that you want to configure and set the Option
ROM to Enabled or Disabled.
4. Press F10 to save the changes and exit BIOS.
7.8.1 Configuring Serial Port Sharing
By default, the SP console (NET MGT) port sends serial port output from the server.
Using Oracle ILOM, you can specify that the host console (COMM1) be assigned as
owner of the server’s serial port output. This feature is useful for Windows kernel
debugging, as it enables you to view non-ASCII character traffic from the host
console.
You can assign serial port output using either the Oracle ILOM web interface or the
command-line interface (CLI). For instructions, see the following sections:
■
“Assign Serial Port Output Using the CLI” on page 7-23
■
“Assign Serial Port Output Using the Web Interface” on page 7-23
Caution –
You should set up the network on the SP before attempting to change the
serial port owner to the host server. If the network is not set up, and you switch the
serial port owner to the host server, you will be unable to connect using the CLI or