Sun Microsystems Sun Fire V1280, Руководство по установке

Страница: 48 / 64

1-36 Sun Fire V1280/Netra 1280 Systems Installation Guide • May 2006
1.7.1 Connecting the Initial Administrative Console
For the initial configuration, connect Serial A port to the serial port on any of the
following devices:
■
ASCII terminal
■
Sun workstation
■
Terminal server (or patch panel connected to a terminal server)
Note –
If the IP address assigned to the 10/100 LOM Ethernet port by DHCP is
known, the 10/100 LOM Ethernet port can be accessed without the Serial A port.
1. Connect the administrative console to the Serial A port.
The Serial A port is a DTE (data terminal equipment) port. An adapter, cross-over or
null modem cable is required to connect the Serial A port to another DTE port. For
Serial A port connector pinouts and adaptor information
, see “LOM Serial Ports” on
page A-6).
2. Turn the customer-supplied circuit breakers power switch to the On position.
3. Turn the system power switch to the On positio n .
Refer to the Sun Fire V1280/Netra 1280 System Administration Guide Administration
Guide .
4. Set up the administrative console.
Refer to the Sun Fire V1280/Netra 1280 System Administration Guide.