Sun Microsystems Sun Fire V1280, Руководство по установке

Страница: 19 / 64

Chapter 1 Physical Installation 1-7
1.1.4 Installing the Rail Assemblies in a Sun
Fire/StoreEdge Cabinet
Sun Fire/StoreEdge™ cabinets have no. 10-32 UNF tapped screw holes in the front
and rear, which are numbered from bottom to top.
Note –
The rail assemblies are reversible. They can be used on either side of the
cabinet.
1. Adjust the position of the adjustable bracket on each rail assembly.
a. Loosen the two nuts that secure the adjustable bracket.
b. Reposition the adjustable bracket to the location stamped ‘SUNFIRE’ on the
rear bracket and resecure the adjustable bracket.
2. Adjust the length of each rail assembly.
a. Loosen the four nuts that secure the rear bracket.
b. Reposition the rear bracket to the location marked ‘Sun Fire Cabinet’ on the
slide assembly and resecure the rear bracket.
1.1.4.1 Installing the Rail Assemblies in the Bottom Position
1. Insert the pins in the front bracket into cabinet holes 22 and 33 (
FIGURE 1-4
) .
The pins will hold the bracket in place until the bracket is secured.
2. Secure the adjustable bracket into cabinet holes 24 and 31 with two no. 10-32 UNF
screws.
3. Secure the front bracket into cabinet holes 24 and 31 with two no. 10-32 UNF
screws.
4. Repeat Step 1 through Step 3 for the second rail assembly.