Sun Microsystems Sun Fire V1280, Руководство по установке

Страница: 13 / 64

1-1
C H A P T E R
1
Physical Installation
Sun Fire V1280/Netra 1280 systems can be shipped in one of three ways:
1. Not in a cabinet and with a slide rail mounting kit for installation in a cabinet
2. Not in a cabinet and intended to be freestanding
3. Pre-installed in a cabinet
For method 1 begin with Section 1.1, “Installing Slides and Rails” on page 1-2 . For
methods 2 and 3 begin with Section 1.4, “Installing the Cable Management Arm” on
page 1-21 .
This chapter contains the following sections:
■
Section 1.1, “Installing Slides and Rails” on page 1-2
■
Section 1.2, “Installing the System in a Cabinet” on page 1-12
■
Section 1.3, “Installing Slide Rail Locking Nuts” on page 1-19
■
Section 1.4, “Installing the Cable Management Arm” on page 1-21
■
Section 1.5, “Connecting Sun Fire V1280 Power Cables” on page 1-30
■
Section 1.6, “Connecting Netra 1280 Power Cables” on page 1-32
■
Section 1.7, “Connecting Consoles to the System Controller” on page 1-35
■
Section 1.8, “Connecting the I/O Assemblies” on page 1-38
■
Section 1.9, “Powering On the System” on page 1-38
■
Section 1.10, “Powering Off the System” on page 1-38
■
Section 1.11, “Installing Additional Hardware” on page 1-39
■
Section 1.12, “Installing Additional Peripheral Devices” on page 1-40