Sun Microsystems Sun Blade 100, Руководство по обслуживанию

Страница: 153 / 222

Chapter 8 Removing and Replacing the Motherboard and Related Components 8-21
FIGURE 8-9
Removing and Replacing the Riser Board
8.6.2 Replacing the Riser Board
1. Position the riser board into the chassis (
FIGURE 8-9
).
The riser board fits between the staggered tabs on the chassis.
2. Using a No. 2 Phillips screwdriver, replace the three screws securing the riser
board to the system chassis.
3. Replace the motherboard.
See Section 8.5.2 “Replacing the Motherboard” on page 8-17.
4. Reconnect all the cables to both sides of the riser board.
5. Replace the PCI card(s) into the riser board.
See Section 8.4.2 “Replacing a PCI Card” on page 8-13.
6. Detach the wrist strap, replace the system cover, and power on the system as
described in Chapter 9 “Finishing Component Replacement.”
Screws (3)