Sun Microsystems Sun Blade 100, Руководство по обслуживанию

Страница: 139 / 222

Chapter 8 Removing and Replacing the Motherboard and Related Components 8-7
FIGURE 8-3
Removing and Replacing the NVRAM/TOD
8.2.2 Replacing the NVRAM/TOD
1. Replace the NVRAM/TOD as follows (
FIGURE 8-3
):
a. Position the NVRAM/TOD carrier on the motherboard.
See
FIGURE C-7
on page C-23.
b. Carefully insert the NVRAM/TOD carrier into the motherboard socket.
Note –
The carrier is keyed so that the NVRAM/TOD can be installed only one way.
c. Push the NVRAM/TOD carrier into the socket until it is properly seated.
2. Replace any PCI card(s) removed from slots 1 and 3.
See Section 8.4.2 “Replacing a PCI Card” on page 8-13.
3. Detach the wrist strap, replace the system cover, and power on the system as
described in Chapter 9 “Finishing Component Replacement.”
NVRAM/TOD
Socket keys
Carrier