Sun Microsystems Sun Blade 100, Руководство по обслуживанию

Страница: 110 / 222

6-8 Sun Blade 100 Service Manual • October 2000
Caution –
Use proper ESD grounding techniques when handling components. Wear
an antistatic wrist strap and use an ESD-protected mat. Store ESD-sensitive
components in antistatic bags before placing them on any surface.
2. Disconnect the secondary IDE cable assembly connector from the following
(
FIGURE 6-5
):
■
Secondary hard drive
■
Riser board (J503: also labeled IDE2)
3. Remove the secondary IDE cable assembly from the chassis.
FIGURE 6-5
Removing and Replacing the Secondary IDE Cable Assembly
6.2.8 Replacing the Secondary IDE Cable Assembly
1. Position the secondary IDE cable assembly into the chassis (
FIGURE 6-5
).
2. Connect the secondary IDE cable assembly connectors to the following:
■
Secondary hard drive
■
Riser board (J503: also labeled IDE2)
IDE2 (J503)