Sun Microsystems Sun Blade 100, Руководство по обслуживанию

Страница: 50 / 222

2-2 Sun Blade 100 Service Manual • October 2000
2.2 SunVTS Requirements
Your system must meet the following requirements to run SunVTS:
■
The SunVTS packages must be installed. The main package is SUNWvts. There
are additional supporting packages that differ based on the version of the Solaris
operating environment that is installed. For specific details, refer to the
corresponding SunVTS documentation (described below).
■
The system must be booted to the multiuser level (level 3).
■
To run SunVTS with a GUI, that GUI must be installed. Otherwise, run SunVTS
with the TTY-mode interface.
2.3 SunVTS References
To find out more information about the use of SunVTS, refer to the SunVTS
documentation that corresponds to the Solaris software version that you are running
(see
TABLE 2-1
).
The following list describes the content of each SunVTS document:
■
SunVTS 4.x User’s Guide describes how to install, configure, and run the SunVTS
diagnostic software.
■
SunVTS 4.x Quick Reference Card provides an overview of how to use the SunVTS
CDE interface.
■
SunVTS 4.x Test Reference Manual provides details about each individual SunVTS
test.