Sun Microsystems Sun Blade 100, Руководство по обслуживанию

Страница: 135 / 222

Chapter 8 Removing and Replacing the Motherboard and Related Components 8-3
FIGURE 8-1
Removing and Replacing the CPU
8.1.2 Replacing the CPU
Note – If you are replacing an old CPU, the CPU will be permanently bonded to the
heatsink. However, if you are installing a new CPU, the heatsink and CPU will be
separate.
1. Position the CPU over the motherboard CPU socket (
FIGURE 8-1
).
Caution – The CPU will be damaged if you replace it incorrectly. Ensure that the
CPU key is correctly positioned before you attempt to press the CPU into the socket.
Viewed from the front of the system chassis, the key is at the left rear corner of CPU.
The key is the diagonal corner cut on the CPU (
FIGURE 8-1
).
Heatsink retaining clip
Heatsink
Heatsink key
CPU socket
CPU Key
CPU locking lever