Sun Microsystems Sun Blade 100, Руководство по обслуживанию

Страница: 89 / 222

Chapter 4 Troubleshooting Procedures 4-21
The following code example shows the audio diagnostic output message.
4.7.2.11 EIDE Diagnostic
To start the EIDE diagnostic, type
11
at the
OBdiag
Menu prompt. The EIDE
diagnostic validates both the EIDE chip and the IDE bus subsystem.
The following code example shows the EIDE diagnostic output message.
CODE EXAMPLE 4-16
Audio Diagnostic Output Message
Enter (0-13 tests, 14 -Quit, 15 -Menu) ===> 10
TEST=’audio_test’
SUBTEST=’cs4231_test’
Codec_ID=’8a’
Version_ID=’a0’
SUBTEST=’external_lpbk’
###OBDIAG_MFG_START###
TEST=’audio_test’
STATUS=’FAILED’
SUBTEST=’external_lpbk’
ERRORS=’1 ‘
TTF=’505 ‘
SPEED=’299.80 MHz’
PASSES=’1 ‘
MESSAGE=’Error: External Audio Test not run: Please set the mfg-
mode to sys-ext.’
Enter (0-13 tests, 14 -Quit, 15 -Menu) ===>
CODE EXAMPLE 4-17
EIDE
Diagnostic
Output Message
Enter (0-13 tests, 14 -Quit, 15 -Menu) ===> 11
TEST=’ide_test’
SUBTEST=’probe-cmd-device’
SUBTEST=’hd-and-cd-check’
Enter (0-13 tests, 14 -Quit, 15 -Menu) ===>