Sun Microsystems Cobalt LX50, Руководство пользователя

Страница: 43 / 138

Installing the Server Using the Slide Rail Kit (Optional)
User Guide—Sun Cobalt LX50 Server 2-21
Installing the Server Using the Slide Rail Kit (Optional)
The rail kit is an extra cost option, and allows you to install the Sun Cobalt LX50 server in most four-post rack and
cabinet systems.
Required Tools
• Phillips screwdriver
Kit Contents
The slide rail kit, available as optional equipment, includes the following items:
• Slide rail assemblies—qty. 2
• Rail brackets—qty. 4
• Fastener pack—qty. 1 (see Figure 20)
Figure 20. Fasteners Provided
Remove the Inside Rails
1. Fully extend a rail assembly (Figure 21). The finger tab (D) for the extension lock is revealed.
2. Press the finger tab and slide the inside rail (C) from the middle rail (B) until it completely separates.
✍
Note: The middle rail (B) and outer rail (A) cannot be separated.
A
B C D
E
A. Screws, #10-32 x
∫
-inch—qty. 8
B. Screws, #6-32 x 3/16-inch—qty. 10
C. Screws, #10-32 x 7/8-inch—qty. 2
D. Nut bars—qty. 4
E. Washers—qty. 10