Sun Microsystems Cobalt LX50, Руководство пользователя

Страница: 87 / 138

Removing and Replacing the Cover
User Guide—Sun Cobalt LX50 Server 5-3
Removing and Replacing the Cover
Many of the equipment replacement procedures require that you remove the chassis cover. Before you remove the
cover, observe the safety instructions in the section titled “Safety: Before You Remove the Cover” on page 5-2
To remove the cover, follow these steps:
1. While pressing the blue latch button (A) with your left thumb, push down on the top cover and slide it back using
the heel of your right hand on the black pad (see Figure 62).
Figure 62. Removing the Cover
2. Set the cover aside and away from the immediate work area.
✍
Note: A non-skid surface or a stop behind the chassis may be needed if attempting to remove
the top cover on a flat surface. Sliding the server chassis on a wooden surface may mar the
surface (there are no rubber feet on the bottom of the chassis).
A