SUN EAST PEAK-350
电脑波峰焊用户手册
67 -74
The
temperature
cannot reach to
the preset
limits.
1.
There may be something
wrong with the heat pipe.
2.
The thermocouple may
disconnect.
3.
There may be open
circuit on solid relay.
4.
The exhaust fan may be
too powerful or the wind
inside the room may
affect the temperature.
5.
There may be something
wrong
with
the
photo-electricity
components.
6.
The preset temperature
may be improper.
1.
Check if the static resistor is
broken after the circuit breaks
off.
2.
Check
or
replace
the
thermocouple.
3.
Replace the solid relay with
new ones.
4.
Adjust the exhaust board and
take measures to avoid being
affected by the wind inside the
room.
5.
Replace the photo-electricity
with new ones.
6.
Re-set the preset temperature.
/
The
temperature on
heat zone is
much more
than the preset
temperature.
1.
The preset temperature
may be improper.
2.
The preset warn upper
limit of temperature may
be improper.
3.
The
temperature
controller may be out of
control.
4.
There may be open
circuit on thermocouple.
5.
The solid relay may be
broken.
6.
The
photo-electricity
components
may
be
broken.
1.
Re-set the preset temperature.
2.
Re-set the preset warn upper
limit of temperature.
3.
Check
or
replace
the
temperature controller with
new ones.
4.
Check
or
replace
the
thermocouple with new ones.
5.
Replace the solid relay with
new ones.
6.
Replace the photo-electricity
components with new ones.
The red signal
light
enlightens.
The conveyor
belt does not
work.
1.
The actiyator may be in
bad
connection
or
broken.
2.
The D/A board may be
in bad connection or
broken.
3.
The conveyor motor
may be broken or the
buffer of power supply is
in bad connection.
4.
The emergency switch
may be pressed.
1.
Check the wiring of actiyator
or replace it with new ones.
2.
Check the D/A board or
replace it with new ones.
3.
Replace the motor with new
ones or check if the buffer of
power supply and actiyator
sensor is OK.
4.
Revolve
the
emergency
switch from left to right.
/
Содержание PEAK-350
Страница 24: ...SUN EAST PEAK 350 23 74...
Страница 25: ...SUN EAST PEAK 350 24 74 2 Parameter Setup of Machine...