SUN EAST PEAK-350, Руководство пользователя

Страница: 45 / 74

SUN EAST PEAK-350
电脑波峰焊用户手册
44 -74
It is used to compensate the balance of actual temperature and test temperature if there is
difference between them. It will be OK after inputting the balance into the above dialog box.
Reset value can be negative values, for example
“–
2
”
.
4.3.7 Parameter Re-using
There must be all kinds of running parameters under operation such as conveyor speed, heat
temperature etc. There are two ways to set up the system parameters. One is to re-use the
former parameters and the other is to re-set all parameters.
Below is the first way of re-using the former parameter:
1
．
Choose
“
File
”
menu and Press at
“
Open
”
button.
Choose the file with needy parameters (File is named
“
*.ln
”
), and press
“
Open
”
button once;
then all parameters will load as the current parameters automatically.
2. Re-set all parameters
Refer to
“
Parameter Setup
”
.
4.4 Adjustment before Operation
4.4.1 Angle adjustment of lead rail (Refer to 3.3.1)
4.4.2
Adjustment of conveyor chain (Refer to 3.3.2)