SUN EAST PEAK-350, Руководство пользователя

Страница: 43 / 74

SUN EAST PEAK-350
电脑波峰焊用户手册
42 -74
4.3.3 PID Parameter Setup
(PEAK-350 without such function)
4.3.4 Overheat Warning
Set up the warn parameters of pre-heater and solder pot for the temperature there too high
or too low. Fill the temperature value in the blank and press
“
Enter
”
button for finalization.
The system will warn if the actual temperature is higher than the upper limit. The system
also will warn if the actual temperature is lower than the lower limit.
4.3.5 Setup of Inner Timer
Press
“
Timer Setup
”
under the
“
Parameter Setup
”
menu bar to go into the above dialog
box.