SUN EAST PEAK-350, Руководство пользователя

Страница: 6 / 74

SUN EAST PEAK-350
电脑波峰焊用户手册
5 -74
in injury or fire.
Operation:
Danger
Prohibited
Do not operate the switches by wet hands or do not wipe the electric
components by wet cloth. Otherwise, it may result in electric shock.
Mandatory
l
The system can set the automatic switch on/off function. Do not touch the control
panel grounding terminals or the connecter of outer components, nor check and
repair the machine, when the power supply is still on even if it
’
s at stop state.
Otherwise, it may result in electric shock.
l
The operator cannot switch on or off the power supply until he or she
makes sure that the environment around him and himself are safe.
Otherwise, it may result in injury.
Warning
Prohibited
The melt point of solder is very high. Do not touch the surface of solder
even if you can see that the solder is still in solid state. Otherwise, it may
result in scald.
Mandatory
l
If the auto starting time has been set, be sure there is enough solder in the
soldering pot and the switch of the solder pot reflow meter is reliable. Otherwise
it may result in fire or solder tunnel damage.
l
The user should ensure that only qualified personnel who are familiar
with general safety rules and has been training to operating this
machine.
Maintenance
Danger
Prohibited
Only qualified personnel can check and maintain this soldering system.
Otherwise, it may result in the machine broken or operator injury.
Mandatory
l
Do not check the machine until the power supply is off. Otherwise, it
may result in electric shock.
l
The electric components such as inverter, UPS, DC power and driver
etc may be in high voltage within some time after the power supply is
off. Be sure that the power supply has been off at least 5 minutes