Suin TFG2900A Series Скачать руководство пользователя

Страница: 83 / 96

TFG2900A Series Function/Arbitrary Waveform Generator Users’ Guide

Suin Instruments Co., Ltd

3.24.1 USB Host:

This connector is provided on front panel, which is used to insert U-disk to

store and recall the user-defined waveforms or instrument state, or used for system update.

3.24.2 USB Device:

The USB Device connector is provided on rear panel, which be connected

with PC using USB cable to remote control the instrument, or download the user-defined

waveform with waveform edit software, or update the instrument using firmware updating

software. For detail instruction, please refer to CD.

3.24.3 LAN Port:

The LAN Port is provided on rear panel, which be connected with PC through

LAN cable to remote control for the instrument. For detail instruction, please refer to CD.

3.24.4WIFI Port:

The WIFI Port is provided on rear panel, which is connected with PC through

wireless connection. For detail instruction, please refer to CD.

3.25 Frequency Reference

3.25.1 Frequency reference input port

《

10MHz Ref In

》

The port is provided on rear panel, the

external clock signal can be input to synchronize this instrument with other devices, or the

external clock with higher precision can be used to further improve the accuracy of output

frequency. The clock input port adopts ac coupling mode of transformer, and there is no common

ground terminal with other ports of the instrument.

When there is an external clock access, and the clock frequency is within the range that can be

locked, the prompt message of ‘external clock access’ is displayed, and ‘Ext Ref On’ is displayed

in the state information display area. The instrument automatically switches to the external clock.

The prompt message ‘the external clock is invalid, please move the excluded clock’ displayed if

the external clock frequency is beyond the range that can be locked. At the same time, ‘Ext Ref In’

is displayed in the status information display area, and the device will automatically switch to the

internal clock. If the external clock is not removed, the instrument will frequently detect whether

the external clock can be locked, which will make the frequency of output signal unstable, so the

external clock needs to be removed.

If the external clock is disconnected, prompt ‘external clock removal’ is displayed. The state

information display area no longer displays information related to the external clock, and the

instrument will automatically switch to the internal clock.

Содержание TFG2900A Series

































































































Результаты поиска

Содержание TFG2900A Series

Отзывы:

Похожие инструкции для TFG2900A Series

Бренды по названию

Популярные бренды

Suin TFG2900A Series, Руководство пользователя

Результаты поиска

Содержание TFG2900A Series

Отзывы:

Похожие инструкции для TFG2900A Series

Бренды по названию

Популярные бренды