Subaru 2008 OUTBACK, Руководство пользователя

Страница: 281 / 444

Black plate (288,1)
北 米
Model "A2440BE-B" EDITED: 2007/ 5/ 7
7-40
Starting and operating
Vehicle without SI-DRIVE
The indicator light turns on when the
ignition switch is turned to the ON position;
it turns off approximately 2 seconds later.
This indicator light flashes during activa-
tion of the skid suppression function and is
illuminated steadily during activation of the
traction control function.
The following two situations could indicate
a malfunction of the Vehicle Dynamics
Control system; if either should occur,
have an authorized SUBARU dealer carry
out an inspection of that system at the first
available opportunity.
.
The indicator light does not turn on
when the ignition switch is turned to the
ON position.
.
The indicator light does not turn off
approximately 2 seconds after the ignition
switch has been turned to the ON position.
!
Vehicle Dynamics Control warning
light/Vehicle Dynamics Control OFF
indicator light
Vehicle with SI-DRIVE
Vehicle without SI-DRIVE
This single light has the function of
indicating malfunctions in the Vehicle
Dynamics Control system and the function
of indicating that the Vehicle Dynamics
Control system is not operating. It comes
on in the event of a malfunction in the
system and is illuminated whenever the
system is not operating.
!
Vehicle Dynamics Control warning
The warning light comes on when the
ignition switch is turned to the
“
ON
”
position and goes off several seconds
after engine startup. This lighting pattern
indicates that the Vehicle Dynamics Con-
trol system is operating normally.
The following situations could indicate a
malfunction of the Vehicle Dynamics