Subaru 2008 OUTBACK, Руководство пользователя

Страница: 263 / 444

Black plate (270,1)
北 米
Model "A2440BE-B" EDITED: 2007/ 5/ 7
7-22
Starting and operating
.
If you attempt to shift up when the
vehicle speed is too low, the transmis-
sion will not respond.
.
You can perform a skip-shift (for
example, from 4th to 2nd) by operating
the selector lever twice in rapid suc-
cession.
.
The transmission automatically se-
lects 1st gear when the vehicle stops
moving.
.
If the temperature of the automatic
transmission fluid becomes too high,
the
“
AT OIL TEMP
”
warning light will
come on and upshifts to 4th gear will
not be possible. Immediately stop the
vehicle in a safe place and let the
engine idle until the warning light goes
off.
&
Maximum speeds
WARNING
When down shifting, ensure that the
vehicle is not travelling at a speed
exceeding the Maximum Allowable
Speed for the gear which is about to
be selected. Failure to observe this
precaution can lead to engine over-
revving and this in turn can result in
engine damage.
In addition, sudden application of
engine braking caused by down
shifting when the vehicle is travel-
ling on a slippery surface can lead
to wheel locking; as a consequence,
control of the vehicle may be lost
and the risk of an accident in-
creased.
The following tables show the maximum
speeds that are possible with each differ-
ent gear.
When down shifting, it is important to
confirm that the current vehicle speed is
not in excess of the Maximum Allowable
Speed of the gear which is about to be
selected.
mph (km/h)
Position 2.5-liter non-turbo models
1 30 (48)
2 63 (101)
3
99 (160)
Never exceed posted speed limits.
NOTE
In order to prevent over-revving during
deceleration of the vehicle, the trans-
mission will remain in the current gear
if the speed of the vehicle is in excess
of the Maximum Allowable Speed for
the gear to which the selector lever has
been moved.
&
Driving tips
.
On a road surface where there is a risk
of wheelspin (for example, a snow- or
gravel-covered road), you can pull away
from a standstill (safely and easily) by first
selecting the 2nd gear of the manual
mode.
.
Always apply the foot or parking brake
when the vehicle is stopped in the
“
D
”
or
“
R
”
position.
.
Always set the parking brake when
parking your vehicle. Do not hold the
vehicle with only the transmission.
.
Do not keep the vehicle in a stationary
position on an uphill grade by using the