Subaru 2008 OUTBACK, Руководство пользователя

Страница: 117 / 444

Black plate (120,1)
北 米
Model "A2440BE-B" EDITED: 2007/ 5/ 7
2-28
Keys and doors
NOTE
One-touch operation does not take
place when the moonroof is tilted up
and down. Push the switch continu-
ously to tilt the moonroof up and down.
!
Sliding function
1) Open
2) Close
Push the
“
Open/Close
”
switch rearward to
open the moonroof. The sun shade will
also be opened together with the moon-
roof.
Push the
“
Open/Close
”
switch forward to
close the moonroof. The moonroof will
stop halfway if you continue to press on
the switch. Release the switch once and
push it again to close the moonroof
completely.
To stop the moonroof at a selected mid-
way position while opening or closing it,
momentarily push the switch to the
“
OPEN
”
or
“
CLOSE
”
side.
After washing the vehicle or after it rains,
wipe away water on the roof prior to
opening the moonroof to prevent drops
of water from falling into the passenger
compartment.
!
Anti-entrapment function
When the moonroof senses an object
trapped between its glass and the vehi-
cle
’
s roof during closure, it automatically
moves back to either of the following
positions according to the point at which
it senses the object:
.
When the moonroof senses the object
at a point between the halfway stop
position and fully closed position, it moves
back to the halfway stop position and
stops there.
.
When the moonroof senses the object
at a point between the halfway stop
position and fully open position, it moves
back to the fully open position and stops
there.
The anti-entrapment function may also be
activated by a strong shock on the moon-
roof even when there is nothing trapped.
NOTE
For the sake of safety, it is recom-
mended that you avoid driving with the
moonroof fully opened.
!
Sun shade
The sun shade can be slid forward or
backward by hand while the moonroof is
closed.
If the moonroof is opened, the sun shade
also moves back.
&
Moonroof (Station wagon)
The front moonroof has a tilting function
and the rear moonroof has a sliding
function.
Both moonroofs operate only when the
ignition switch is in the
“
ON
”
position.