Subaru 2008 OUTBACK, Руководство пользователя

Страница: 267 / 444

Black plate (274,1)
北 米
Model "A2440BE-B" EDITED: 2007/ 5/ 7
7-26
Starting and operating
WARNING
Do not drive the vehicle with the
selector lever in the
“
N
”
(neutral)
position. Engine braking has no
effect in this condition and the risk
of an accident is consequently in-
creased.
!
D (Drive)
This position is for normal driving. The
transmission automatically shifts into a
suitable gear from 1st to 5th according to
the vehicle speed and the acceleration
you require.
When more acceleration is required in this
position, press the accelerator pedal fully
to the floor and hold that position. The
transmission will automatically downshift
to 4th, 3rd, 2nd or 1st gear. When you
release the pedal, the transmission will
return to the original gear position.
To use the manual mode, move the lever
from this position into the manual gate.
!
While climbing a grade
When driving up a hill, undesired upshift to
4th or 5th gear is prevented from taking
place when the accelerator is released.
This minimizes the chance of subsequent
downshifting to a lower gear when accel-
erating again. This prevents repeated
upshifting and downshifting resulting in a
smoother operation of the vehicle.
NOTE
The transmission may downshift to 2nd
or 1st gear, depending on the way the
accelerator pedal is pressed to accel-
erate the vehicle again.
!
While going down a hill
When you are descending a hill or any
other slope while braking with the Sport
Sharp (S#) mode selected, the transmis-
sion may downshift to 4th or 3rd gear
depending on how hard you depress the
brake pedal, causing engine braking to
work. Reacceleration for a short time will
cause the transmission to upshift normally.
NOTE
.
A 5th-to-4th automatic downshift will
not occur at speeds above 78 mph (126
km/h) and a 4th-to-3rd automatic down-
shift will not occur at speeds above 53
mph (86 km/h).
.
Automatic downshifts to 4th or 3rd
may occur even when driving on a level
road depending on conditions, such as
how hard you depress the brake pedal.
&
Selector lever reverse inhi-
biting function
This function prevents accidental move-
ment of the selector lever to the
“
R
”
position while the vehicle is moving.
The function becomes operational when
the vehicle reaches a speed of approxi-
mately 6 mph (10 km/h). Once opera-
tional, it prevents the selector lever from
being moved from the
“
N
”
position to the
“
R
”
position. When the vehicle speed
drops below 6 mph (10 km/h), the function
is canceled. The selector lever can then
be moved to the
“
R
”
and
“
P
”
positions.
When the ignition switch has been turned
to the
“
LOCK
”
position, movement of the
selector lever from the
“
N
”
position to the
“
R
”
position is possible for a limited time
period by depressing the brake pedal and
then becomes impossible. Also, the se-
lector lever cannot be moved to the
“
R
”
position after it has been placed in the
“
P
”
position and then placed again in the
“
N
”
position.
When the movement of the selector lever
from the
“
N
”
position to the
“
R
”
position
has become impossible, turn the ignition
switch back to the
“
ON
”
position then
move the selector lever to the
“
P
”
position.
Pressing the selector lever release button
also makes it possible to move the