47
WIB8000
Provider
Provider
WIB
8000
Internet
© STULZ GmbH – all rights reserved EN/11.2018/G67C
wib8000 original instructions
Telephone
network
Modem
Ethernet
patch cab-
le 1:1
A5. WIB8000 connection by telephone network
Analog
connection
1. direct connection via modem
2. Connection by internet
PC with browser
PC with browser
Security
Consider the security notes of the MoRoS router manual in chapter 1 "Security" at the commissioning.
Telephone
network
MoRoS Router
MoRoS Router
When no network is available at the site, there is the possibility to connect the WIB8000 to the telephone net-
work by a MoRoS router.
WIB8000 and MoRoS router must be connected by a 1:1 Ethernet patch cable, the MoRoS router establis-
hes an analog connection to the telephone network. At the user side there are two possibilities to establish the
connection to the telephone network. 1. Direct connection via modem, 2. Connection by internet.
A5.1 Start-up
Set the parameters of the IP network at the WIB8000 and in the MoRoS router and link both units by a patch
cable.
Power supply
The router requires a power supply between the limits of 10V and 60V with a power of 3W as described in
chapter 4 "Technical Data" of the MoRoS router manual.
