50
EN/11.2018/G67C © STULZ GmbH – all rights reserved
wib8000 original instructions
A6. Network check list
1. General
Use DHCP:
Yes (continue with item 2)
No
IP address of the WIB: [___.___.___.___]
Subnet mask:
[___.___.___.___]
Gateway: [___.___.___.___]
DNS server:
[___.___.___.___]
2nd DNS server:
[___.___.___.___]
http port: ___
2. Access authorization
Modify password:
3. E-mail
SMTP server:
___.___.___.___
(IP address / server name) _______________
(max. 30 characters)
SMTP port:
_____
(max. 5 numerals)
User:
____________________ (max. 64 characters)
____________________
Password (plain text):
____________________ (max. 64 characters)
____________________
Authentication *:
None
DIGEST-MD5
CRAM-MD5
LOGIN
PLAIN
AUTO
Sender:
____________________ (max. 64 characters)
____________________
4. SNMP - 1st part
Read community:
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
(max. 20 characters)
Write community:
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
(max. 20 characters)
Trap receiver 1
Community:
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
(max. 20 characters)
IP address/ server name: [ _ _ _ . _ _ _ . _ _ _ . _ _ _ ]
port:
_ _ _ _ _
(max. 5 numerals)
Trap receiver 2
Community:
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
(max. 20 characters)
IP address/ server name: [ _ _ _ . _ _ _ . _ _ _ . _ _ _ ]
port:
_ _ _ _ _
(max. 5 numerals)
* Setting "Auto" may result in authentication error if it is insufficiently implemented at the e-mail server.
In case of authentication errors with your e-mail account, ask your e-mail host provider which is the proper method and select this
method deliberately.
