© STULZ GmbH, Hamburg
EN / 10-2015 / 1000683
-
7
-
STULZUltraSonic-SystemforDirectRoomHumidificationBNB-
Informationonthisdocument
1.7.
Liability claims for defects
Following the assembly and operating instructions in this Technical Manual is a prerequisite for trou-
ble-free operation of the
STULZUltraSonicBNBultrasonichumidifier
and for potential claims for defects.
Read the Technical Manual before working with the product.
1.8.
Exclusion of liability
Following the assembly and operating instructions in this Technical Manual is a prerequisite for safe
operationoftheproductandforattainingthespecifiedproductcharacteristicsandperformancefeatures.
STULZshallnotbeliableforanyinjuryorpropertydamageoranyfinanciallossresultingfromnon-
compliance with the assembly and operating instructions. In such cases, all liability for material defects is
excluded.
1.9.
Copyright
All brand and product names are trademarks or registered trademarks of the products bearing these
names. UltraSonic® is a registered trademark of STULZ GmbH.
All rights reserved, including in respect of this translation. No part of this document may be reproduced in
anyform(e.g.printing,photocopying,microfilm,datatransferorothermethod)orduplicatedorpro-
cessed by electronic means, without the written consent of STULZ GmbH.
Technical data subject to change without notice.
1.5.
Formatting
Format
Name
Example
bold
Operating states
Values that require setting
ON
or
OFF
.
Set the voltage to
7.5 V
.
italic
References in the document
Prerequisite, procedure, result
"
XX
"
Buttons
Press the "►" button
1.6.
Nomenclature
Full name
Name in this document
STULZUltraSonicBNBultrasonichumidifier
Ultrasonichumidifier
STULZ UltraSonic Master
USM
STULZ UltraSonic Slave
USS
STULZ heat exchanger terminal module FDSX
Heat exchanger terminal module FDSX
Table 1: Nomenclature