Studer RCC-02, Руководство пользователя

Страница: 26 / 104

Studer Innotec SA
RCC-02/-03
22
V4.4.0
User manual
10.3 S
ETTING OF TIME
{5001}
AND DATE
{5002}
The Xtender has a perpetual calendar and an internal clock powered by a backup battery. The
correct adjustment of the date and time allows accurate recording of events occurring in the
installation as well as correct use of time-related functions, e.g. the disabling of the auxiliary relays
during the night.
10.4 U
SER LEVEL
{5012}
The setting of the user level allows you to choose the access to the Xtender according to your level
of expertise.
The
INFO ONLY level may be selected by entering the code:
460081
This level does not allow the Xtender configurations to be modified; it only allows information to be
displayed on the system.
Use the INFO ONLY level after adjusting the configurations if the remote control is
located in a public place or if it is accessible by people who are not authorized to
carry out adjustments on your system.
You may change the level at any time to make new adjustments, by entering the
appropriate code.
The
BASIC level allows you to configure basic Xtender functions, limiting the field of actions to simple
configurations. Please note that the incorrect adjustment of basic configurations may lead to the
malfunctioning of the installation. This level is selected by default. To return to this level after a
change, enter code:
943274
The EXPERT level allows access to more complex Xtender configurations and this level of usage may
only be used with extensive specialist knowledge. To access the expert level, enter code:
426468
In Expert mode, it is possible to change the battery voltage values. In order to comply
with standard EN/IEC62109-1, an installation should not have a battery voltage above
60Vdc.
10.5 D
RIVE THE REMOTE CONTROL TO THE USER LEVEL BASIC
{5019}
You can with this option bring the remote control back to the level “user Basic”.
Use this function at the end of the system setting to go out of the EXPERT mode.
10.6 INSTALLER - M
ODIFICATION OF THE
X
TENDER PARAMETERS THRESHOLDS
TOGETHER
{5042}
10.6.1 Force all Xtender parameters to threshold {5043}
This function enables you to modify the access levels altogether.
10.6.2 Restore the default thresholds of the Xtender parameters {5044}
This function enables you to restore the factory access thresholds of the Xtender parameters.