
Studer Innotec SA
RCC-02/-03
36
User manual
14
SETTING OF THE XTENDER
A complete list of the accessible parameters can be found at the end of this manual.
14.1
G
ENERAL
The Xtender inverter/charger has been designed to
ensure that all basic functions of an energy management
system work completely independently. In its original
version, no adjustment is required apart from setting the
battery charge current {1138} and the maximum current
of AC source (input limit) {1107}.
Caution, a hazardous setting of the parameters may lead to a disfunctioning of the
whole installation, or event to damaging it.
Nevertheless, in certain installation conditions, it may be necessary to adjust some operating
configurations. This is why the RCC remote control gives access to the adjustment of many
configurations and within a range largely exceeding the usual values. Use these adjustment options
with care and only with due specialist knowledge. Changing configurations is not the responsibility
of Studer Innotec. Please refer to the chapter on limitation of responsibility for more information on
this topic.
14.2
C
ONFIGURATION ON A SYSTEM WITH SEVERAL
X
TENDERS
When there is a system to which several Xtenders are connected, the changing of a configuration is
global. It will be applied to all the Xtenders connected together. To carry out adjustments on a single
Xtender, it is necessary to remove the connection cables and only keep the connection between
the remote control and the Xtender on which the different adjustments is being carried out. It is
therefore possible to configure each Xtender of a system independently. Once the configuration has
been carried out, the original connection can be re-established.
Note: If you have carried out an individual configuration, once a configuration has
been changed, the system reconnected by the data connection cable modifies this
configuration for all the Xtenders connected.
Caution, in case of a different connection of the devices, the rule regarding
terminations must be applied and the devices shut down and restarted.
14.3
U
TILISATION AND ACCESS LEVELS
The functions described below refer to the EXPERT level. Depending on the user level selected, access
to all the functions may not be possible. Refer to the chapter on setting the user level of the remote
control for more information on this subject.
14.4
P
RE
-
DEFINED FUNCTIONS OF THE AUXILIARY RELAYS
The two auxiliary relays (dry contacts) of the inverter-charger Xtender are already programmed with
factory settings and can be activated with various functions. They react to different signals.
For more information on the auxiliary contacts pre-set functions, please see the inverter-charger
Xtender manual.
Caution, if your installer or supplier has done pre-settings, these pre-set functions may
have been changed.
Содержание RCC-02
