Studer RCC-02, Руководство пользователя

Страница: 42 / 104

Studer Innotec SA
RCC-02/-03
38
V4.4.0
User manual
14.6 INSTALLER - U
TILISATION AND ACCESS LEVELS
The configurations of the Xtender are defined by the following elements:
 The minimum
 The value
 The maximum
 The user level necessary to access it
When in client mode (Basic or Expert), the remote control
gives access to the different configuration values. In
INSTALLER or installer mode, you have access to the other
elements. This means that you can define the minimum and
the maximum of each setting. The values remain limited,
however. You can also determine the minimum access
level for each parameter.
If the element is preceded by a star, it means that it is the
same as the factory setting.
When you access a setting for modification, you can adjust successively the minimum, the default
value, the maximum, and the user level necessary to access each setting.
The user level is represented by an abbreviation. You can make the setting accessible
from BASIC, EXPERT, INSTALLER or QSP level.
Use the following values for the levels:
Accessible to Basic level: BA
Accessible to Expert level: EX
Accessible to Installer level: IN
Accessible to QSP level: QS
Use this function if you wish to remove the possibility for clients to set a parameter of
the Xtender.
14.7 B
ASIC SETTINGS
{1100}
The basic configurations serve to adapt the Xtender characteristics to the elements that surround it.
Use these configurations in order to optimize the operation of the inverter/charger and to benefit
from the maximum performance of your installation.
14.7.1 Setting of the basic parameters by means of the potentiometer in
the XTS {1551}
With this option you can choose whether the setting buttons in the XTS are active or not. . When they
are, the corresponding functions are not displayed on the remote control (RCC). The settings carried
out by the buttons integrated can not be seen either in the remote control or in the backup files.